So, you’ve been vaping for a while now and you’ve noticed that your vape isn’t producing as much vapor or flavor as it used to. Chances are, it’s time to change your vape coil. Don’t worry, changing your vape coil is a simple process that anyone can do. In this article, we’ll walk you through the steps of how to change coil in vape.

Before we get started, it’s important to note that every vape setup is slightly different, but in general, the process is the same. You’ll need to disassemble the vape, remove the old coil, and install the new one. If you’re not sure which coil to use, check your vape’s user manual or do a quick online search to find out. Once you have the new coil, you’re ready to get started. So, grab your vape and let’s get to it!

Getting to Know Your Vape

The Anatomy of a Vape

Before you can change your vape coil, it’s important to understand the different parts of your vape. A typical vape consists of four main components: the battery, the tank, the coil, and the mouthpiece. The battery is what powers your vape, while the tank holds the e-liquid. The coil is responsible for heating up the e-liquid, and the mouthpiece is where you inhale the vapor.

Identifying Your Coil

The coil is a small but important part of your vape. It’s responsible for heating up the e-liquid and turning it into vapor. There are different types of coils, but the most common ones are made of either kanthal, stainless steel, or nickel. Kanthal coils are the most common and are suitable for most vapers. Stainless steel coils are more durable and can be used in both wattage and temperature control mode. Nickel coils are less common and are only suitable for temperature control mode.

To identify your coil, you’ll need to take apart your vape and look at the coil itself. The coil is a small, cylindrical piece of metal with a cotton wick wrapped around it. It’s usually located inside the tank, which is where the e-liquid is stored. Once you’ve identified your coil, you can then proceed to change it.

Remember to always follow the manufacturer’s instructions when changing your coil. Some vapes may require you to unscrew the coil from the bottom of the tank, while others may require you to unscrew it from the top. Make sure to also prime your new coil before using it to avoid any dry hits.

Now that you know the basics of your vape and how to identify your coil, you’re ready to change it and enjoy a fresh, flavorful vaping experience.

Why Change the Coil?

If you’re a regular vaper, you know that changing the coil is an essential part of maintaining your device. But why is it necessary to change the coil? In this section, we’ll take a closer look at the lifespan of a coil, and the signs that indicate it’s time for a change.

The Lifespan of a Coil

The lifespan of a coil can vary depending on a number of factors, including the type of coil, the frequency of use, and the type of e-liquid you use. However, as a general rule, most coils will last anywhere from one to two weeks.

Over time, the coil will begin to degrade, and this can have a number of negative effects on your vaping experience. For example, an old coil can cause your e-liquid to taste burnt, and it can also reduce the amount of vapor you produce.

Signs Your Coil Needs a Change

So, how do you know when it’s time to change your coil? Here are a few signs to look out for:

• Burnt taste: If you notice a burnt taste when you vape, it’s a sign that your coil is on its last legs. This is caused by the buildup of gunk on the coil, which can make it difficult for the e-liquid to vaporize properly.
• Reduced vapor production: If you’re not getting as much vapor as you used to, it’s a sign that your coil is losing its effectiveness. This can be caused by a number of factors, including a buildup of gunk on the coil and a decrease in the coil’s ability to heat up.
• Leaking: If your tank is leaking, it’s possible that your coil is to blame. Over time, the coil can become damaged, which can cause e-liquid to leak out of the tank.
• Gurgling: If you hear a gurgling sound when you vape, it’s a sign that your coil is flooded with e-liquid. This can be caused by a number of factors, including a buildup of gunk on the coil and a decrease in the coil’s ability to heat up.

By keeping an eye out for these signs, you can ensure that you’re always vaping with a fresh, effective coil.

Preparation for Coil Change

Before you start changing the coil in your vape, there are a few things you need to do to prepare. Don’t worry, it’s not rocket science, but it’s important to take these steps to ensure a successful coil change.

Gathering Your Tools

First things first, gather all the necessary tools you’ll need for the job. You don’t want to be running around looking for something while your vape is in pieces. Here’s a list of things you’ll need:

• A new coil
• A screwdriver (if your vape requires one)
• A paper towel or cloth
• A pair of tweezers (optional, but helpful)

Make sure you have everything on this list before you start. Trust us, it’ll save you a lot of time and frustration.

Safety First, Folks!

Before you start changing the coil, make sure your vape is turned off and unplugged. Safety first, folks! You don’t want to accidentally fire your vape while you’re working on it. That could lead to some serious problems.

Also, make sure your hands are clean and dry. You don’t want any dirt or moisture getting into your vape. And if you’re using tweezers, make sure they’re clean too.

Now that you’ve gathered your tools and taken the necessary safety precautions, you’re ready to start changing the coil.

Changing the Coil: Step by Step

Changing the coil in your vape device is a crucial part of maintaining your device’s performance and ensuring the best possible vaping experience. Here is a step-by-step guide on how to change the coil in your vape device.

Removing the Old Coil

1. First, disassemble the vape. Unscrew the tank from the body of the vape to expose your coil. Every vape setup is slightly different, but in general, you can easily unscrew the tank from the bottom section. Hold the tank upside down and twist the tank off using your hands.
2. Take out the old coil from the tank. You can do this by unscrewing the coil from the base of the tank. Be careful when handling the coil as it may still have e-liquid in it.
3. Dispose of the old coil properly. You can throw it in the trash or recycle it if possible.

Installing the New Coil

1. Choose the right coil for your vape device. Make sure that the new coil is compatible with your vape device and that it has the right resistance level.
2. Prime the new coil. This step is crucial to ensure that the new coil works properly. Drip a few drops of e-liquid onto the cotton wick of the new coil. This will help saturate the wick and prevent it from burning out when you vape.
3. Screw the new coil onto the base of the tank. Make sure that it is screwed tightly to prevent any leaks.
4. Reassemble the vape. Screw the tank back onto the body of the vape. Fill the tank with e-liquid and let it sit for a few minutes to allow the new coil to absorb the e-liquid.
5. Test the new coil. Take a few puffs from the vape to make sure that the new coil is working properly.

That’s it! You have successfully changed the coil in your vape device. Remember to follow these steps every time you need to change the coil to ensure the best possible vaping experience.

After the Change: What Now?

Congratulations! You’ve successfully changed your vape coil. Now, what should you do? Here are a few tips to help you get the most out of your vaping experience.

Testing Your Vape

Before you start vaping, it’s important to test your device to make sure everything is working properly. Here are a few things you can do to ensure your vape is working correctly:

• Check the airflow: Make sure the airflow is set to your desired level. If the airflow is too low, you may not get enough vapor, and if it’s too high, you may get a harsh hit.
• Prime your coil: Take a few dry hits without pressing the fire button to help saturate the wick with e-liquid. This will help prevent a burnt taste and extend the life of your coil.
• Start at a low wattage: Begin vaping at a lower wattage and gradually increase it until you find your sweet spot. This will help prevent burnt hits and prolong the life of your coil.

Maintenance Tips

To keep your vape in top condition, it’s important to perform regular maintenance. Here are a few tips to help you keep your device in tip-top shape:

• Clean your tank regularly: Clean your tank at least once a week to remove any e-liquid residue that may have built up. This will help prevent gunk from accumulating on your coil and improve the flavor of your e-juice.
• Replace your coil regularly: Coils don’t last forever, so it’s important to replace them regularly. How often you need to replace your coil will depend on how often you vape and what type of e-juice you use.
• Store your vape properly: When you’re not using your vape, store it in a cool, dry place. Avoid leaving it in direct sunlight or extreme temperatures, as this can damage your device.

By following these tips, you can help prolong the life of your coil and enjoy a better vaping experience. Happy vaping!

Frequently Asked Questions

How do I get my vape to stop tasting like burnt socks?

First things first, you need to change your vape coil. A burnt taste is a sure sign that your coil has reached the end of its life. Refer to this guide for more information on when to change your vape coil.

Can I change my vape coil without getting juice all over my hands?

It’s possible, but it takes a bit of finesse. First, make sure your tank is empty. Then, use a paper towel to grip the old coil and unscrew it from the base. Insert the new coil and screw it in place. Fill your tank with e-juice and let it sit for a few minutes to allow the coil to saturate. Voila! No mess, no fuss.

What’s the best way to avoid breaking my vape while changing the coil?

Be gentle! Vapes are delicate instruments, and rough handling can lead to damage. When changing your coil, take your time and be careful not to force anything. If you’re unsure of what you’re doing, consult the manufacturer’s instructions or watch a tutorial video.

How often should I change my vape coil for optimal performance?

The lifespan of a vape coil can vary depending on how often you use your device and the type of e-juice you use. As a general rule of thumb, you should change your coil every 1-2 weeks. Refer to this guide for more information on when to change your coil.

Is it possible to change the coil in a vape pod without making a mess?

Yes! First, remove the pod from your device. Then, remove the old coil by pulling it out of the pod. Insert the new coil and push it into place. Fill your pod with e-juice and let it sit for a few minutes to allow the coil to saturate. Reattach the pod to your device and you’re good to go!

What’s the most efficient method for changing the coil in a Vaporesso XROS vape?

To change the coil in a Vaporesso XROS vape, first remove the pod from your device. Then, unscrew the base of the pod to access the coil. Remove the old coil by pulling it out of the base. Insert the new coil and screw the base back into place. Fill your pod with e-juice and let it sit for a few minutes to allow the coil to saturate. Reattach the pod to your device and enjoy!